其他
建议收藏 | Ubuntu16.04 ftp服务器安装+配置
文章来源：CSDN
ftp服务器安装与配置
1. ftp服务端的安装如果之前配置过ftp服务器的还是之后配置的服务器，无法启动服务，那么基本是配置出现了错误，那么可先完全卸载后再进行安装。如果无法定位多半是镜像源的问题，请更换阿里源。
sudo apt-get update
sudo apt-get install vsftpd
vsftpd --version //检测是否安装
2. ftp服务端的配置
vim /etc/vsftpd.conf //编辑配置文件
修改vsftpd.conf文件如下：
listen=NO //是否开启监听ipv4和ipv6数据
listen_ipv6=YES //是否开启监听ipv6数据
# Allow anonymous FTP? (Disabled by default).
anonymous_enable=NO //是否允许匿名登陆，无需密码
# Uncomment this to allow local users to log in.
local_enable=YES //是否允许本地用户登录
# Uncomment this to enable any form of FTP write command.
write_enable=YES //是否允许登陆者上传文件
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022 //设置本地用户默认要减免的权限
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES //目录消息，能够给远程登陆的用户发送目录
#
# If enabled, vsftpd will display directory listings with the time
# in your local time zone. The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES //服务器所展示的目录将随着本地时间而改变
#
# Activate logging of uploads/downloads.
xferlog_enable=YES //开启上传下载的日志记录
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES //确认连接传输的端口号为20
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log //日志文件存放位置
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES //日志文件采用标准格式
# You may fully customise the login banner string:
ftpd_banner=Welcome to FTP service. //在使用shell时登陆那么会发送欢迎语
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES //对本地用户是否实施限制
chroot_list_enable=YES //开启限制白名单
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list //白名单路径，若无这个文件需要自己创建
# This option should be the name of a directory which is empty. Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
# pam_service_name=vsftpd
pam_service_name=ftp //此处ubuntu的系统需要改为ftp
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
ssl_enable=NO
#
# Uncomment this to indicate that vsftpd use a utf8 filesystem.
utf8_filesystem=YES //编码统一为utf8编码，可以识别中文，防止乱码 3. vftpd配置完成添加设置ftpuser用户和访问目录
1. 创建ftp用户组和用户
sudo groupadd ftpusers //创建ftpusers用户组
sudo useradd -m ftpuser_lxr//创建一个用户并且自动创建家目录为/home/ftpuser_lxr
（第二种方式：mkdir /home/ftpuser_lxr //先创建家目录sudo userad -d /home/ftpuser_lxr ftpuser_lxr //绑定这个家目录)
usermod -G ftpusers ftpuser_lxr //将这个新用户加入到ftpusers用户组中
sudo passwd ftpuser_lxr //更改密码
mkdir /home/ftpuser_lxr/ftp //为用户添加一个具有一定权限的文件夹
chmod 777 -R /home/ftpuser_lxr/ftp //新建一个pub目录用于存放文件，并且赋予全部权限
usermod -s /sbin/nologin username //限制用户登录方式；限制用户username只能通过ftp登陆，而不能直接登陆服务器2.将该用户加入vsftpd.chroot_list白名单中mkdir /etc/vsftpd.chroot_list
vim vsftpd.chroot_list该文件内容如下：
#白名单
ftpuser_lxr3.开启并重启vsftpd的服务systemctl start vsftpd或者service vsftpd start
systemctl restart vsftpd或者service vsftpd restart
测试
方法一：
打开浏览器，在地址栏输入：ftp://ip_addresss方法二：
在ubuntu中使用shell输入：ftp ip_address方法三：
在windows中在文件管理器地址栏输入：ftp://ip_addresss，该方式可以上传下载文件方法四:
在windows中使用cmd输入：ftp://ip_addresss //显示连接成功版权申明：内容来源网络，版权归原创者所有。除非无法确认，我们都会标明作者及出处，如有侵权烦请告知，我们会立即删除并表示歉意。祝愿每一位读者生活愉快！谢谢!
推荐阅读