SmartGen新品 | 功能升级——新版分体式发电机组控制器HGMS62上市

分体式发电机组控制器HGMS62具有AMF功能，标配RS485、USB、CANBUS（限HGMS62MCAN）接口；主控和显示模块采用分体式设计，结合标配的线束和连接器，可实现发电机组控制系统的快速成套；减少人为接线失误，提高发电机组成套的效率。

主要功能特点：

1、防护等级高:显示部分IP65；

2、启动、燃油及2路可编程继电器采用插拔式安装方式；

3、兼容电喷及电子调速的发动机（对应主控制器HGMS62MCAN、HGMS62M）；

4、主控模块HGMS62M/62MCAN同显示模块HGMS62D、充电器、电子调速器采用线束连接（线束长度可定制）；

5、主控模块采用螺丝固定式接线端子，接线可直接到发动机及发电机；

6、主控模块、显示模块具均有USB接口,方便参数设置；

7、市电、发电电压采样内置10A保险（方便更换）；

8、直流供电内置32A保险（方便更换）；

9、主控模块具有电源、报警、运行LED指示；

10、显示模块可定制化；

11、6路继电器输出口；

12、5路模拟量输入口（其中2路可定义电压型、电阻型、电流型）；

13、4路开关量输入口；

14、具有DC +5V输出（电压型传感器供电）；

15、可设置参数，作为单机自启动控制器使用。

一、应用示意图：

二、个性化显示模块：

三、典型应用图

四、外型尺寸

往期精彩阅读

SmartGen | New Split Type Genset Controller HGMS62 Launched

Split type genset controller HGMS62 has AMF function with standard RS485, USB, CANBUS (only for HGMS62MCAN) ports. The master control module and display module adopt split type design, combine standard harness and connector, thus fast realizing complete genset control system. It can reduce human wiring errors and improve complete genset efficiency.

Main function characteristics:

1.High protection level: IP65 for display part;

2.Start, fuel and 2-way programmable relay adopt pluggable installation;

3.Compatible with ECU and electronic GOV engines (correspond to HGMS62MCAN, HGMS62M);

4.The master control module HGMS62M/62MCAN connects with display module HGMS62D, charger, electronic GOV via harness (harness length can be customized);

5.The master control module adopts screw to fix terminal, which can connect to engine and generator directly;

6.The master control module and display module both have USB port that is convenient for parameter setting;

7.Built-in 10A fuse for mains, gen voltage sampling (easy to replace);

8.Built-in 32A fuse for DC power supply (easy to replace);

9.The master control module has power, alarm, running indicators;

10.Customized display module;

11.6-way relay output ports;

12.5-way analog input ports (2-way can be defined as voltage/resistance/current type);

13.4-way digital input ports;

14.With DC +5V output (voltage type sensor supplies power);

15.Can set parameters and can be used as single auto start controller.

Application Diagram:

Individual Display Module:

Typical Application:

Overall Dimension:

Wonderful reading in the past

www.smartgen.com.cn